美国伯乐Bio-Rad小型垂直电泳转印系统(电泳槽+转印芯+基础电源)1658033 电泳槽


美国Bio-Rad伯乐Mini-PROTEAN® Tetra电泳槽1658033 现货包括三部分1658001、1703935和1645050Mini-PROTEAN® Tetra 电泳槽技术参数Mini-PROTEAN® Tetra Cell 电泳梳每孔中的[much]多样品量

Mini-PROTEAN® Tetra 电泳槽订购信息:

The Mini-PROTEAN Tetra Cell for handcast gels (1658001), Mini Trans-Blot Cell (1703935), and PowerPac Basic Power Supply (1645050) are bundled together in this offering.

Bio-Rad Mini-Protean小垂直板电泳槽介绍 该电泳系统有四部分组成:A电泳槽外壳、相对应的模块、缓冲液槽和盖;B玻璃板和梳子;C加样引导器;D制胶支架和制胶框。该系统设计髙至特点是功能灵活,即可以做普通的蛋白电泳、Western印迹,又可以做电洗脱和双向凝胶电泳。另外制胶简便,大大节约了整个电泳的时间。 功能多样使用简便的 Mini-PROTEAN® Tetra 电泳槽是进行小型垂直电泳的理想选择。电泳槽可容纳 1-4 块手灌胶或 Ready Gel 预制胶,您可以根据科研的需求灵活的进行选择。Mini-PROTEAN® Tetra 电泳槽省去了冗长的组装程序,具有科技智慧的封盖装置,可防止错误组装。 Mini-PROTEAN® Tetra 电泳槽特点和优势: 一小时内完成多达四块小型胶电泳 还可选配 Mini Trans-Blot® 电泳转印槽进行 western 转印 软橡胶垫片与玻板形成严密的密封以确保无泄漏灌胶 带有简单凸轮的灌制框**确保在任何平面上实现[accurate对齐 平行排列的灌胶架**能同时灌制两块凝胶,弹簧杠杆设计使得软橡胶沉淀产生良好的密封性 一天内完成双向凝胶电泳 Mini-PROTEAN® Tetra 电泳槽应用 聚丙烯酰胺凝胶电泳(PAGE 或 SDS-PAGE) 双向凝胶电泳 筛选新样本 评估样本制备条件

Mini Trans-Blot Cell 安装使用指南

Mini Tans-Blot Cell配合Mini Protean Tetra电泳槽使用,可在电泳完成后直接进行转印。 1.准备工作:在冰盒里装上水放-20℃冷冻;配制转印缓冲,放4℃保存 2.剪好合适尺寸的滤纸,转印膜(和胶大小相仿),在缓冲中浸湿;将胶在缓冲中平衡15-60min(根据胶的不同厚度);在缓冲液中浸湿软垫 3.根据图中顺序准备好转印三明治,注意不能有气泡,合上胶夹上的夹子 4.把做好的胶夹三明治放到电极模块内,同样方法做另一块三明治,放入 5.放入准备好的冰冻冰盒,倒入足够量的缓冲液充满缓冲液槽 6.在槽内放一磁力搅拌器磁子,在转印过程中快速搅拌以保持良好的散热和缓冲能力 7.盖上盖子,接上电泳仪开始转印 常用的转印缓冲液配方和转印条件如下:

参数规格

    选型指南 小型垂直电泳玻璃板,厚玻板和薄玻板 又叫 短玻板和长玻板Mini垂直电泳梳子(小型垂直电泳梳子)品牌信息 Bio-Rad公司始创于上世纪60年代,总部设在美国加州,经过40年的不断开拓与发展,公司持续保持健康的年销售增长率和利润率,现在已发展为世界临床诊断和生命科学领域屈指可数的高科技跨国公司之一。Bio-Rad公司的产品主要分布在生命科学和临床诊断两大领域。主要产品包括:各类电泳产品、定量及定性PCR产品、基因突变分析产品、凝胶成像系统、蛋白质组学研究系统、蛋白纯化平台及各类相关试剂耗材。

凝胶数1–4
预制胶Mini-PROTEAN® 预制胶
手灌胶使用 Mini-PROTEAN 玻板灌制
凝胶尺寸(宽 x 长)预制: 8.6 x 6.8;手灌: 8.3 x 7.3
玻璃板尺寸
短板10.1 x 7.3
玻板10.1 x 8.2
2 块凝胶的缓冲液总体积,ml700 ml
4 块凝胶的缓冲液总体积,ml1,000 ml
SDS-PAGE 典型运行时间35–45 分钟(在 200 V 恒定电压下)
推荐的电源PowerPac™ Basic 或 PowerPac HC(大电流)
尺寸(宽 x 长 x 高),cm12 x 16 x 18
重量,kg/lb1.0/2.2
凝胶格式小型

孔数或孔类型

孔宽度梳厚度
0.75 mm1.0 mm1.5 mm
512.70 mm70 µl105 µl160 µl
95.08 mm33 µl44 µl66 µl
105.08 mm33 µl44 µl66 µl
153.35 mm20 µl26 µl40 µl
IPG6.20 mm420 µl730 µl
Prep/2-D
参考孔3.10 mm13 µl17 µl30 µl
样品孔67.44 mm310 µl400 µl680 µl
Mini-PROTEAN®Tetra Cell - 16580004凝胶垂直电泳系统,凝胶厚度0.75 mm,包括配套模块,2个铸造支架,4个铸造框架,10孔梳子,5个短板和5个隔板Mini-PROTEAN®Tetra Cell - 16580014凝胶垂直电泳系统,1.0毫米凝胶厚度,包括配套模块,2个铸造支架,4个铸造框架,10孔梳子,5个短板和5个隔板
Mini-PROTEAN®Tetra Cell - 1658002双凝胶垂直电泳系统,凝胶厚度0.75 mm,包括铸造支架,2个铸造框架,10孔梳子,5个短板和5个隔板Mini-PROTEAN®Tetra Cell- 16580032凝胶垂直电泳系统,1.0毫米凝胶厚度,包括铸造架,2个铸造框架,10孔梳子,5个短板和5个隔板
Mini-PROTEAN®Tetra Cell - 16580064凝胶垂直电泳系统,1.5毫米凝胶厚度,包括配套模块,2个铸造支架,4个铸造框架,10孔梳子,5个短板和5个隔板Mini-PROTEAN®Tetra Cell - 16580072凝胶立式电泳系统,1.5毫米凝胶厚度,1个铸造支架,2个铸造框架,10孔梳子,5套玻璃板
Mini-PROTEAN® Tetra Vertical Electrophoresis Cell for Mini Precast Gels, 4-gel1658004 4凝胶立式电泳系统,包括电极组件,配套运行模块,水箱,电力电缆盖,迷你电池缓冲坝Mini-PROTEAN® Tetra Vertical Electrophoresis Cell for Mini Precast Gels, 2-gel1658005 2凝胶立式电泳系统,包括电极组件,水箱,带电源线的盖子,迷你细胞缓冲坝
Mini-PROTEAN® Vertical Electrophoresis Cell, 4-gel, for Mini Precast Gels with Mini Trans-Blot® Module1658030 用于预制凝胶的电泳和印迹系统,包括4凝胶系统(#165-8004)和印迹模块(#170-3935)Mini-PROTEAN® Tetra Vertical Electrophoresis Cell for Mini Precast Gels, with Mini Trans-Blot® Module and PowerPac™ Basic Power Supply1658034 用于预制凝胶的电泳和印迹系统,4-gel系统(#165-8004),不带缓冲罐和盖子的印迹模块(#170-3935),包括PowerPac Basic Power Supply(#164-5050)
Mini-PROTEAN® Tetra Vertical Electrophoresis Cell for Mini Precast Gels, 4-gel, Mini Trans-Blot® Module, and PowerPac™ HC Power Supply1658036 用于预制凝胶的电泳和印迹系统,4-gel系统(#165-8004),不带缓冲罐和盖子的印迹模块(#170-3935),包括PowerPac大电流电源(#164-5052)Mini-PROTEAN® Tetra Cell, Mini Trans-Blot® Module, and PowerPac™ Basic Power Supply1658033 电泳和印迹系统,10孔,1.0毫米,4凝胶系统(#165-8001)和印迹模块(#170-3935),没有下部缓冲罐和盖子,包括电源(#164-5050)
参数名称参数值
商品名                小型垂直电泳转印系统
品牌名                bio-rad|Biorad(OG)
产地                新加坡 美国
原厂型号                Mini-PROTEAN Tetra+Mini Trans-Blot
原厂货号                1658033
规格/包装                包含:PowerPac Basic基础型电源,电泳槽,玻璃板,灌胶系统,上样引导装置,电泳梳,转印槽;for handcast gels (1658001), Mini Trans-Blot Cell (1703935), and PowerPac Basic Power Supply (1645050) are bundled together in this offering
性能描述                基础电源:输出范围:电压10-300 V;电流4-400 mA;功率75 W (髙至);输出类型:恒压、恒流、恒功率,可定时1-999分钟;有暂停/继续功能;有断电后自动恢复功能; 输出插孔4对并联,可同时对四个同类型的电泳槽进行电泳;通过EN-61010, CE标准电泳仪玻璃板:封边垫条长时间性地固定在长玻板上,保证玻板[accurate对齐,防止漏胶;灌胶系统:平行排列的设计能同时看到正在灌制的两块凝胶;.
主要用途                用于核酸定量、基因表达水平分析、基因突变检测、GMO检测及产物特异性分析等多种研究领域,聚丙烯酰胺凝胶电泳(PAGE 或 SDS-PAGE) ,双向凝胶电泳,筛选新样本,评估样本制备条件
详细参数                可同时进行电泳的凝胶数量:可同时进行4块SDS-PAGE凝胶的电泳实验 胶面积:8.3 x 7.3 cm 短玻璃板面积:10.1 x 7.3 cm 长玻璃板面积:10.1 x 8.2 cm 梳子厚度:0,75mm,1.0mm,1.5mm 缓冲液体积:700-1000 ml   其他特长标配:转印(western blot)模块
选型指南Selection Guide配件耗材:
Mini-PROTEAN® Tetra Cell Casting Stand with Clamp Kit for 2 Core System1658051 Pkg of 1, includes 2 stands, 4 frames, 4 gaskets, and 5 gel releasers, for use with the Mini-PROTEAN Tetra cell casting modulesMini-PROTEAN® Tetra Cell Casting Stand with Clamp Kit for Single Core System1658052 Pkg of 1, includes 1 stand, 2 frames, 2 gaskets, and 5 gel releasers, for use with the Mini-PROTEAN Tetra cell casting modules,
Mini-PROTEAN® Tetra Cell Casting Module1658008 5-well, 0.75 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer platesMini-PROTEAN® Tetra Cell Casting Module1658009 9-well, 0.75 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guide
Mini-PROTEAN® Tetra Cell Casting Module1658010 10-well, 0.75 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guideMini-PROTEAN® Tetra Cell Casting Module1658011 15-well, 0.75 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guide
Mini-PROTEAN® Tetra Cell Casting Module1658012 Prep/2-D well, 0.75 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer platesMini-PROTEAN® Tetra Cell Casting Module1658013 5-well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates
Mini-PROTEAN® Tetra Cell Casting Module1658014 9-well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guideMini-PROTEAN® Tetra Cell Casting Module1658015 10-well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guide
Mini-PROTEAN® Tetra Cell Casting Module1658016 15-well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guideMini-PROTEAN® Tetra Cell Casting Module1658017 Prep/2-D well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates
Mini-PROTEAN® Tetra Cell Casting Module1658018 ReadyStrip™ IPG strip well, 1.0 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer platesMini-PROTEAN® Tetra Cell Casting Module1658019 5-well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates
Mini-PROTEAN® Tetra Cell Casting Module1658020 9-well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guideMini-PROTEAN® Tetra Cell Casting Module1658021 10-well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guide
Mini-PROTEAN® Tetra Cell Casting Module1658022 15-well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates, sample loading guideMini-PROTEAN® Tetra Cell Casting Module1658023 Prep/2-D well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer plates
Mini-PROTEAN® Tetra Cell Casting Module1658024 ReadyStrip™ IPG strip well, 1.5 mm gel casting module, includes 2 casting stands, 4 casting frames, 5 combs, 5 short plates and 5 spacer platesMini-PROTEAN® Cassette Opening Lever4560000 Pkg of 1, 100% aluminum and recyclable opening lever for Mini-PROTEAN precast gel cassettes
Sample Loading Guide1653132 Pkg of 1, 15-well, sample loading guide, blueSample Loading Guide1653146 Pkg of 1, 10-well, sample loading guide, yellow
Sample Loading Guide1653201 Pkg of 1, 9-well, sample loading guide, redSample Loading Guide 1653203 Pkg of 1, 12-well, sample loading guide, green
Mini-PROTEAN® Casting Stand 1653303 Pkg of 1, casting stand for Mini-PROTEAN Tetra electrophoresis system and 2 gasketsMini-PROTEAN® Casting Frame 1653304 Pkg of 1, casting frame for Mini-PROTEAN Tetra electrophoresis system
Mini-PROTEAN® Casting Stand Gaskets 1653305 Pkg of 2, replacement gaskets for casting stand for use with Mini-PROTEAN Tetra electrophoresis systemMini-PROTEAN® Tetra Electrode Assembly 1658037 Pkg of 1, replacement electrodes, for use with Mini-PROTEAN Tetra cell
Mini-PROTEAN® Tetra Companion Running Module 1658038 Pkg of 1, replacement part, for use with Mini-PROTEAN Tetra cellBuffer Tank 1658039 Pkg of 1, replacement part, for use with Mini-PROTEAN® Tetra cell
Buffer Tank and Lid 1658040 Pkg of 1, replacement tank and lid for use with Mini-PROTEAN® Tetra cellCell Lid With Power Cables 1658041 Pkg of 1, replacement part, for use with Mini-PROTEAN® Tetra cell
Replacement Gaskets 1653149 Pkg of 2, replacement gasket for Mini-PROTEAN® Tetra electrophoresis assembly and Mini-PROTEAN 3 clamping frame, greenMini Cell Buffer Dams 1653130 Pkg of 2, buffer dams for use with Mini-PROTEAN® Tetra and Mini-PROTEAN® Dodeca™ electrophoresis systems
Gel Releasers 1653320 Pkg of 5, gel releaser for Mini-PROTEAN® Tetra system, Mini-PROTEAN® 3 Dodeca™ cell, Mini-PROTEAN 3 multi-casting chamber, and PROTEAN® Plus Dodeca™ cellMini-PROTEAN® Tetra Cell Casting Stand & Clamps 1658050 Pkg of 1, casting stand with 2 frames, for use with Mini-PROTEAN Tetra cell casting modules (gaskets not included)
Short Plates1653308 Pkg of 5, short plate for Mini-PROTEAN® Tetra system and Mini-PROTEAN 3 multi-casting chamberSpacer Plates With 0.75 mm Integrated Spacers1653310 Pkg of 5, spacer plate with 0.75 mm integrated spacer, for Mini-PROTEAN Tetra system and Mini-PROTEAN® 3 multi-casting chamber
Spacer Plates With 1.0 mm Integrated Spacers1653311 Pkg of 5, spacer plate with 1.0 mm integrated spacer, for Mini-PROTEAN Tetra system and Mini-PROTEAN® 3 multi-casting chamberSpacer Plates With 1.5 mm Integrated Spacers1653312 Pkg of 5, spacer plate with 1.5 mm integrated spacer, for Mini-PROTEAN® Tetra system and Mini-PROTEAN 3 multi-casting chamber
Mini-PROTEAN® Comb, 5-well, 1.0 mm, 105 μl1653357 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)Mini-PROTEAN® Comb, 9-well, 1.0 mm, 44 μl1653358 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)
Mini-PROTEAN® Comb, 10-well, 1.0 mm, 44 μl1653359 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)Mini-PROTEAN® Comb, 15-well, 1.0 mm, 26 μl1653360 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)
Mini-PROTEAN® Comb, Prep+1 well, 1.0 mm, 400 μl1653361 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)Mini-PROTEAN® Comb, IPG well, 1.0 mm, 420 μl1653362 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.0 mm glass plates(165-3311)
Mini-PROTEAN® Comb, 5-well, 1.5 mm, 160 μl1653363 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates(165-3312)Mini-PROTEAN® Comb, 9-well, 1.5 mm, 66 μl1653364 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates(165-3312)
Mini-PROTEAN® Comb, 10-well, 1.5 mm, 66 μl1653365 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates(165-3312)Mini-PROTEAN® Combs, 15-well, 1.5 mm, 40 μl1653366 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates
Mini-PROTEAN® Comb, Prep+1 well, 1.5 mm, 680 μl1653367 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates(165-3312)Mini-PROTEAN® Comb, IPG well, 1.5 mm, 730 μl1653368 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 1.5 mm glass plates(165-3312)
Mini-PROTEAN® Comb, 5-well, 0.75 mm, 70 μl1653352 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 0.75 mm glass plates(165-3310)Mini-PROTEAN® Comb, 9-well, 0.75 mm, 33 μl1653353 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 0.75 mm glass plates(165-3310)
Mini-PROTEAN® Comb, 10-well, 0.75 mm, 33 μl1653354 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 0.75 mm glass plates(165-3310)Mini-PROTEAN® Comb, 15-well, 0.75 mm, 20 μl1653355 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 0.75 mm glass plates(165-3310)
Mini-PROTEAN® Comb, Prep+1 well, 0.75 mm, 310 μl1653356 Pkg of 5, combs for Mini-PROTEAN Electrophoresis Cell, use with 0.75 mm glass plates(165-3310)
© 金山科研平台 Thermo Fisher官网Nunc、QSP、Nalgene、Invitrogen、Gibco耗材试剂授权一级代理是专业的授权总代理区域代理经销平台。
© 如需询价,请加客服QQ:1749072012 、客服微信:jinshanbio,或发送邮件到1749072012@qq.com
© 平台为生命科学研究相关领域提供一站式耗材试剂仪器解决方案和采购服务,数据资源基于CC协议。
© 本文地址:https://thermonunc.cn/thread-18567.htm
产品询价需求提交
返回