名称
pall微生物检测专用滤膜66191
型号
报价
特点
pall微生物检测专用滤膜66191 介质:亲水性混合纤维素酯 孔
pall微生物检测专用滤膜66191参数
孔径
0.45 微米
Typical Thickness
152 µm (6 mils)
Typical Filter Weight
4 mg/cm2
Typical Water Flow Rate
> 65 mL/min/cm2at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature – Water
74 °C (165 °F)
Typical Moisture Pick-up
< 1% after 24 hr at 48% relative humidity at 23 °C (73 °F)
Extractables – Boiling Water
< 2%
Minimum Bubble Point – Water
1.8 bar (180 kPa, 26 psi)
pall微生物检测专用滤膜66191订购信息:
PartNumber
Description
Pkg
GN-6MetricelMembrane,0.45µm(S-Packs)
66265
47mm,plain,sterile
200/pkg
66278
47mm,grid,sterile
200/pkg
66068
47mm,grid,sterile
1000/pkg
66191
47mm,grid,sterile
2000/pkg
66539
50mm,grid,sterile
200/pkg
60016
85mm,grid,sterile(notindividuallypacked)
50/pkg
pall微生物检测专用滤膜66191性能
混合纤维素酯可最大限度提高微生物截留率和复现率
过滤介质:亲水性混合纤维素酯孔径:0.45μm
标准水流速:65ml/min/cm2at10psi标准重量:4mg/cm2
最大操作温度-水:26psi
屈光度:1.152
消毒方法:可高温高压灭菌:单独包装产品经伽玛射线灭菌
©
金山科研平台 Thermo Fisher官网Nunc、QSP、Nalgene、Invitrogen、Gibco耗材试剂授权一级代理是专业的授权总代理区域代理经销平台。
© 如需询价,请加客服QQ:1749072012 、客服微信:jinshanbio,或发送邮件到1749072012@qq.com
© 平台为生命科学研究相关领域提供一站式耗材试剂仪器解决方案和采购服务,数据资源基于CC协议。
© 本文地址:
https://thermonunc.cn/thread-28048.htm
特别声明:以上内容(如有图片亦包括在内)来源于授权厂家或网络,如有侵权,请联系客服删除,本平台不提供信息校正和存储服务。
Notice: The content above (including the pictures if any)comes from authorized manufacturers or networks. In case of infringement, please contact to delete it. This platform does not provide information storage services.